MuslimahAnie - DIY Headboard - HINSdigi

MuslimahAnie – DIY Headboard

MuslimahAnie – DIY Headboard

I’d like to say a little story before I get to the tutorial part. This post comes more like in three parts, The head board, the bed frame and my own personal space.

When I finished with my masters degree, having to be away from home for about 15 months, I came back and decided to make an empty room in the compound a bedroom. I wanted it to be a giant source of posts because I’d like to make my own cloth and shoe storage, my own bed frame, my own headboard. Almost everything. Basically I want a personal space I can experiment with and it would only be me that would deal with the consequences if any arises.

For a while, I just threw the mattress on the floor like most people do and thought about ways to make a bed frame. I wanted to use Coke crates originally and thought about that for a long time and I was worried it would easily move about on a ceramic tiled floor. Then I shifted focus to car tyres. Obviously I wanted something unique, usually, as it is with most of my creations, I google if someone has done it before, but I didn’t see any tyre bed frame anywhere. There were lots of unconventional materials used in some but no tyres. So I decided to give it a try.

You see, I got all the 12 tyres I used for free. In Nigeria, vulcanisers have tons of tyres they aren’t using. Some might want to collect a token for ‘helping’ you and that’s okay.

I brought them home, washed them (it was during harmattan when water was scarce, started to think if it was worth it 😂). Dried them and sprayed with a gold spray paint. And I ran out of it and couldn’t get another gold spray because shoprite no longer had it in stock. That explains the bottom middle one that is not spray painted. On both sides, lets just say that is a design.

And that is it! My repurposed bed frame. There are a lot of things I can still do with (to) it.

To the Post now:
If you’d like to make your own headboard your self, here’s what you’ll be needing.

Thin foam
Thick cotton fabric
Strawboard
Pin tacks
Adhesive Wall tacks

image
Cut the strawboard 10″ by 10″
Cut the thin foam with the above dimensions but leave an allowance of .5″
Cut the fabric with the above dimensions but leave an allowance of about 2″
Arrange the materials like below.
Pin the fabric in place with the pin tacks
Put it on the wall using the adhesive wall tacks.

Arrange them in anyway you want. Either with only one pattern or in an alternating manner.

Reality Check: It won’t hold. The wall tack didn’t hold up for a long time at all. So, what I’ll do (because I’ve not really finished it, I would update this post later) is actually glue it on a plywood that is about 48″ in width (so that the squares can cover it) and the desired length and just put it behind the bed.

The end.

Let me know what you think about it.

P.S. Nigerians, I did not do this project because I couldn’t afford a bed. As usual, I’m exploring the creative aspect of the project despite its crudeness, I have been putting off this post for such a long time because I do not know how the reception will be.

Related Posts



Website Pin Facebook Twitter Myspace Friendfeed Technorati del.icio.us Digg Google StumbleUpon Premium Responsive

Comments

comments

Leave a Reply

Your email address will not be published. Required fields are marked *

MuslimahAnie – DIY Headboard

by HINSdigi time to read: 2 min
0